81 products
81 products
Sort by:
RUCKS & GEAR
BUILT BY HAND IN JAX BEACH, FLORIDA, USA
Each design has been imagined and built from scratch by a member of the SCARS team. It is a LIMITED EDITION, 1 of 1, and will never be made again.
Get them now before they’re gone for good (sorry, no discounts apply).
The GR1 is the toughest Rucksack on planet Earth, built for cities, warzones, and everywhere in between. We handed this 26L workhorse over to the mad scientists at SCARS to craft a one-of-a-kind spooky masterpiece built for spooky season and heavy abuse alike.
This 1-of-1 custom build features custom front-panel embroidery displaying a skull stitched with glow-in-the-dark thread for low-light tactical haunt. Up top, we added a heavy-duty paracord-wrapped handle for maximum, non-slip grab-and-go control, along with an Halloween morale patch.
Overbuilt. Indestructible. Ready for the dark.
BUILT BY HAND IN JAX BEACH, FLORIDA, USA
Each design has been imagined and built from scratch by a member of the SCARS team. It is a LIMITED EDITION, 1 of 1, and will never be made again.
Get them now before they’re gone for good (sorry, no discounts apply).
BUILT BY SCARS: WEAR YOUR SCARS ON YOUR SLEEVE
Scars are proof that you showed up, took the hits, and kept moving forward. Stitched directly into tough-as-nails waxed canvas, the custom barbed wire design represents the grit and resilience forged through hard miles and heavy loads. Hand crafted by the apex repair and customization team in the business, this custom Bullet isn't just a pack, it's a badge of honor.
Looking for your own DIY ruck upgrade? Customize the color of your paracord zipper pulls with this kit and our easy to follow how-to video. Kit contains 12 heat shrink tubes and 4 yards of paracord.
Add your initials and create your own unique personalized leather patch.
NOTE: 5 character limit. Uppercase Letters or numbers (0-9) only. Allow 5-7 business days for customization after placing order. Custom initials can not be changed after order is placed.
Custom patches will ship separately from the rest of your order. Cannot ship internationally.
Waxed Canvas Flight Bag
The Aviator’s Kit Bag is used on all Airborne flight operations (jumping out of planes or helos). Special Forces and other units started using the Aviator’s Kit Bags as travel bags, pilot flight bags, and deployment bags because of the large opening at the top, which is plenty big enough to comfortably allow body armor to fit inside.
Our 32L Kit Bags are inspired by classic aviator's kit bags, which are also used by Special Forces teams to transport a small army’s worth of gear (per person). We've modernized the aviator's kit bag and added functionality not for jumping out of airplanes, but for daily use, travel, and storage.
For Specs + Materials, we chose the strongest possible duck canvas with a waxing process proven over the last 170 years, giving the Kit Bag a retro canvas look with the durability you'd expect.
Waxed Duck Canvas Field Pocket with Red Wing Leather
GR1 Field Pocket, now built with heritage waxed canvas and premium leather handle to match perfect with your GR1 Heritage ruck.
Organize your electronics, use as a dopp kit, for camera gear, or with your rucksack for additional space and organization. The padding keeps contents inside protected and the additional 3 interior pockets keep you organized.
OLD SCHOOL VIBES
Our job is to bring back grit, sweat, and soul to modern day living, and to pay our lessons forward to the next generation. This is an over-built 38L gym bag complete with old school vibes and old school values. Use it hard.
QUICK ACCESS TO TRAVEL & EDC ESSENTIALS
There are SO MANY charging cables in our lives. The Wire Dopp means no more soup sandwiches when you travel. Order in chaos is the goal, and the goal is achievable.
Stash your charging cable, earbuds, and adapter bits for your smartphone, tablet, laptop, or music device in the Wire Dopp. Then, put it in your travel ruck for highly organized yet readily accessible carrying convenience.
Comes with a badass leather embossed GORUCK Spearhead patch — customize with the patch of your choice and use it hard.
WAXED CANVAS MODERN SLING BAG
The original Claymore Bag was developed by the U.S. Army to carry the M18A1 Claymore Mine, the M57 Firing Device, and the M4 Blasting Cap Assembly with a 100 foot cord. These three pieces were placed in the two large pouches at the front of the bag so that individuals could easily carry them until needed.
Using that design with the two large front pockets, we updated the bag to include a slim zipper pocket in the back for notebooks or iPads, two heavy duty buckles, and an adjustable shoulder strap.
For materials, we chose the strongest possible duck canvas with a waxing process proven over the last 170 years, giving a retro look with the durability you'd expect from GORUCK.
The Origins Story
The Claymore Mine was named by its inventor Norman MacLeod after a large medieval Scottish sword.
As they always do, once the mine was used soldiers found that the empty bags worked great to carry extra rations, additional ammunition and personal items. This new Claymore Sling Bag follows in this tradition and makes an excellent messenger or vacation bag wherever you go. The Claymore Sling Bag is perfect to carry a book, iPad, shemagh, notebook and water bottle.
Waxed Duck Canvas GR2
We built GR2 to be the ultimate travel ruck, and it has now been met with our time proven heavy canvas construction.
For materials, we chose the strongest possible duck canvas with a waxing process proven over the last 170 years, giving the ruck a retro canvas look with all of the organization and durability you would expect from GR2.
Note: VERY LIMITED RELEASE OF STORED INVENTORY. COMPATIBLE WITH STANDARD RUCK PLATES ONLY — 10,20,or 30 in front and back for up to 60# of rucking.
Weighted Vest for Training
The world is full of weighted vests with minimal to no padding on your shoulders — instead of padding, it’s nylon straps digging fighting positions into your shoulders, deeper with every movement. Even though the workout is supposed to suck, the straps don’t have to. To fix this problem, we took our shoulder straps from the Rucker which are the most comfortable on the planet under load, and we sized and contoured them to make the world's best Training Weight Vest. Problem solved.
Then we made it comfortable to the skin, even when worn shirtless. And we made it compatible with Ruck Plates up to 2x 30 LBS and other training plates while keeping the weight stable even while sprinting.
If you wear body armor and a uniform in your profession, thank you for your service. Scale up the weight with our adjustable weight vest and train heavier than you fight. If you’re gonna do MURPH this and every year, make it count.
Note: VERY LIMITED RELEASE OF STORED INVENTORY. COMPATIBLE WITH STANDARD RUCK PLATES ONLY — 10,20,or 30 in front and back for up to 60# of rucking.
Weighted Vest for Training
The world is full of weighted vests with minimal to no padding on your shoulders — instead of padding, it’s nylon straps digging fighting positions into your shoulders, deeper with every movement. Even though the workout is supposed to suck, the straps don’t have to. To fix this problem, we took our shoulder straps from the Rucker which are the most comfortable on the planet under load, and we sized and contoured them to make the world's best Training Weight Vest. And now we've curved the top corners of the front plate pocket, right where the shoulders and chest meet, to make it even more comfortable while you work out. Problem solved.
Then we made it comfortable to the skin, even when worn shirtless. And we made it compatible with Ruck Plates up to 2x 30 LBS and other training plates while keeping the weight stable even while sprinting.
If you wear body armor and a uniform in your profession, thank you for your service. Scale up the weight with our adjustable weight vest and train heavier than you fight. If you’re gonna do MURPH this and every year, make it count.
RUCK RACK® MONSTER Overbuilt in America. No shortcuts.
Your training gear deserves better than a hook on the wall. Ruck Rack® Monster provides proper storage that protects your investment and keeps your gear mission-ready.
Two Mounting Options:
1. Squat rack mount | Fits Rogue® Monster Lite/Monster Racks and similar racks | For compatibility, simply confirm that the rack has 5/8" diameter holes (or larger) with 2" spacing
2. Direct wall mount | Single stud installation instead of two studs like our Delta model.
Hardware is included for both mounting options. See here for install instructions - Video
Built to Last.
CNC-bent from 3/16" steel plate with hammered black powder coat. American made, not imported junk. Engineered for all the weight you're carrying.
Holds What Matters:
Rucks | Plate Carriers | Weighted Vests | Hunting Packs | Tactical Gear
Gear Benefits:
Proper ventilation prevents moisture buildup. Proper storage maintains pack shape and extends gear life. Your equipment stays organized and ready.
American Craftsmanship
Designed and manufactured in the USA. Quality you can count on, values you can stand behind.
RUCK RACK® Delta
Wall-Mounted Ruck and Weighted Vest Storage Rack
RUCK RACK Delta is a heavy-duty wall-mounted storage rack designed for rucks, weighted vests, plate carriers, and tactical gear. Built for home gyms, garages, weight rooms, and station use, the Delta keeps loaded gear off the floor, organized, and ready for use.
Constructed from 3/16 inch steel and rated to support up to 150 pounds when properly installed, the Delta is built for serious ruckers, law enforcement, firefighters, and tactical athletes who demand durable, no-compromise gear storage.
Key Features
- Heavy-duty wall-mounted rack
- One-piece CNC-bent steel construction for maximum strength
- Designed for storing rucks, plate carriers, weighted vests, hunting packs, and tactical equipment
- Mounts securely to two wall studs at 16 inches on center with tolerance for spacing variation
- Black textured powder coat finish for long-term durability
- Supports up to 150 pounds when installed per instructions
- Designed and manufactured in the USA
Why Choose the RUCK RACK Delta
The Delta model is purpose-built for storing heavier rucking and tactical gear that should not be left on the floor or piled on shelves. Its one-piece steel design distributes weight evenly across two wall studs, making it ideal for loaded rucks and plate carriers.
Unlike basic hooks or consumer-grade wall storage, the Delta is engineered for real training environments where gear is used daily. Proper storage helps extend the life of your equipment, protects straps and plates, and keeps training spaces organized and professional.
Installation
The RUCK RACK Delta is designed for secure installation into two wall studs spaced at 16 inches on center, with tolerance from 15 to 17 inches to accommodate framing variation. Installation hardware and detailed mounting instructions are provided. Visit our installation page for complete guidance.
Specifications
- Material: 3/16" A36 HRP&O steel
- Finish: Black textured powder coat
- Weight Capacity: 150 pounds when mounted per instructions
- Mounting: Lag screws into two wall studs at 16 inches on center
Made in the USA
RUCK RACK Delta is designed and manufactured in the United States. We proudly support law enforcement, firefighters, first responders, and military servicemembers. Please contact us to learn more about available discounts.
Built for Distance Rucking
Purpose built for long range Rucking and Rucking Events like GORUCK Selection and other endurance events. You have a heavy pack out and you move out for miles and miles on end and you want the most comfortable rucksack ever built on your back.
The Rucker Long Range has padded straps and the fabric used on the back panel and underside of the shoulder straps will not cause friction burn. You can even wear it shirtless and it plays well with delicate fabrics like Merino. There is also Lumbar Support via an additional 30mm of EVA foam padding along the bottom section of the back panel that supports the natural curve of your back. It’s raised up, protects you from friction from seams on pants or belts. And if it’s exposed to your skin, that’s no problem either.
With 2 large compartments and multiple pockets, there is plenty of room for supplies and you can keep everything in its place.
Ruck Plate Compatibility
The Rucker® has been purpose-built for weighted PT and to be the best rucking backpack ever built.
The 39L Rucker® features two (2) Ruck Plate® pockets, one that holds a 10LB, 20LB or 30LB Standard Ruck Plate (secondary pocket) and one that holds a 45LB Plate or 30LB Long Ruck Plate (primary pocket).
Note: If you need more than 75 lbs (good on you) there’s plenty of room for a Filler Bag in the main rucksack compartment or you can always add a Sandbag for even more fun.